| :: Links:: |
Impact Testing Machines |
|||||||||||||||
 |
|||||||||||||||
 |
|||||||||||||||
General Description : |
|||||||||||||||
The Pendulum Impact Tester Model - It30 is designed for conducting Izod & Charpy test The test methods confirm to BS - 131 : PART 4 - 1972 (Amended 15 Aug - 1993) & BSEN : 10045 - 2 : 1993. The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for charpy and the lower one for Izod testing On release, the pendulum swings down to break the speciment and the energy absorved indoing so is measured as the differnece between the height of drop before rupture & height of raise after rupyture of the test specimen and is read from the maximum pointer on the dial scale. |
|||||||||||||||
Controls of Pendulum : |
|||||||||||||||
The Pendulum supported in the starting positions is by a self resetting latch. The release mechanism is operated by lever The pendulum release latch is operated only when this lever isoperated. |
|||||||||||||||
Sirikers & Supports : |
|||||||||||||||
There are two strikers & one combined support availabel for fitting into the Pendulum & on to the base of the machine for Izod, Charpy test. Changing from one striker to another is achived simply by fixing the new striker into its positions. |
|||||||||||||||
Optional Accessoris : |
|||||||||||||||
 Caliper gauge for checking V notch for Izod Charpy as per BS : 131 : PART 1,2,3. Depth notch gauge including V&U notch, angle & radius. Self centering tong. V-notch miling cutter. U-notch miling cutter. |
|||||||||||||||
 |
|||||||||||||||
|
|||||||||||||||
|
|||||||||||||||
Resever the right of change in the above specifications due to continuous changes in design. |
|||||||||||||||