Vickers Hardness Testers ( AIE-VM-50 )

Features :

	Very wide testing range from soft metal like lead up to hardest metals like hardened steel.
	Small indentation to allow testing of precision finished parts.
	Motorised loading and unloading.
	Suitable for thin sheet metals since test loads are very small.
	Built - in projection screw to get accurate results.

Auto Instruments & Engineers Vickers Hardness Tester is a simple & accurate means to produce and measuring the diamond indentation.
These testers are suitable for measuring the hardness of precision metallic parts with wide testing range-from soft to hard, and their accurate results are widely acclaimed.
These testers strictly conform to IS: 1754 - 1986

Technical Data :

Test loads-	5,10,20,30,50kg. 1kg (Optional)
Magnification of optical projection	70x,140x (Optional
Maximum test height (mm) -	200
Scale Least Count (mm) -	0.001
Throat Depth (mm) -	135
Machine dimension (mm)	L585 x W290 x H860
Weight (approx) -	70kg
Power supply	220 VAC, 50Hz, 1-Phase

Construction :

The robust machine frame is designed to accommodate the high precision loading system and an optical projection screen. Specimen is placed on a testing table.
The test cycle is fully automatic. The accurate load is applied on a diamond penetrator by means of automatically. The objective is indexed with the test piece and the diamond indentation is projected on the measuring screen. The diagonals of the indentation are measured by means of the micrometer screw of the projection screen

1. Standard Test Block	1Pc.
2. Diamond Penetrator	1Pc.
3. Weights	1Set.
4. Flat anvil	1Pc.
5. Vee-type anvil (small & Big)	1Pc.
6. Spanners	1Pc
7. Electric Cord	1Pc.
8. Instruction manual	1Book
	Number of Special Accessories are available on request and as per special requirement.

Due to constant Research & Development, Specifications and Features are subject to change without notice

Home | Contact Us | Enquiry

Back